Metkon Finocut Low Speed Precision Cutter/Saw

Posted by:

testeqe

Location:

Arizona

Ad Status:

SOLD

Manufacturer:

Type:

Model:

Year (or range of years):

Condition:

Price (in US dollars):

Quantity:

Type of Seller:

Description:

Metkon Finocut Low Speed Precision Cutter/Saw

The unit has the universal sample holder. There is no blade included. It powers up and I could variably adjust the speed. We have no way to test the unit past this point.

The Unit's Serial Number Tag Reads:
Model Number: FINOCUT
Serial Number: N 0101
Power Requirements: 220 VAC, 50 Hz, 50 W

Key Features:
# High precision

# Easy to use

# Powerful DC motor

# Minimal distortion

# Variable speed from 0 - 600 rpm

# Micrometer adjustment

# Coolant system

# Endless applications

Description:
The FINOCUT low speed precision saw is designed for cutting all types of materials with minimal structural deformation.

The FINOCUT has its place in virtually any metallurgical, geological, electronics, research, biomedical or industrial laboratory. The applications are endless.

The FINOCUT is capable of cutting most materials such as brittle or ductile metals, hard or soft materials, composites, ceramics, rocks, biomaterials, laminates, etc.

The structural integrity of the sample is maintained through FINOCUT's design and operation. Additionally, low kerf-loss and sample holding versatility makes the FINOCUT an essential part of the modern laboratory. The cut surface is ready for microscopic examination with minimal polishing.

The FINOCUT accepts diamond wafering blades up to 125 mm (5") diameter and the wheel speed is continuously variable from 0 to 600 rpm.

Gravity feed and drag lubrication make the FINOCUT easy and convenient to use. The coolant tray can be removed for cleaning without having to remove the blade. Most sample configurations can be gripped with the variety of holders available from Metkon. The sample h olding arm incorporates a micrometer adjustment which enables the operator to place the sample precisely where the cut is desired. Dead weights in 25 gram increments are applied directly to the arm if needed. The sliding weight at the back of the arm allows intermediate forces to be applied. Once the cut is done, the FINOCUT automatically stops and sounds an audible signal to notify the operator that the cutting sequence is finished.