|
Introductions
Using for the various screws adhesive with Anaerobic Adhesive
the machine speed is very fast to suit customer requirements for OEM applications.
Greatly increased the screw, pneumatic components, connectors and other products of the reliability of product
Features
1. Liquid be will evenly dispensing inside the screw
2. Position place adjustment convenience
3. Dispensing end can as your require to adjustable
4. Speed is quickly, high efficiency and stability uniform coating
5. Quantitative high accuracy and long life
6. Easy to operate, Compact
7. Large supply device and saving time reloading.
8. Locks bolts, prevents tampering stops corrosion
9. Seals weld, seals threaded pipe, seals nicked threads
10. Digital circuit timing controlling technology was used, and the dispensing time ,motor speed, delay and advance time ,can be set through the digital dial.
11. The pedal /ring/inductive switches can be chosen.
12.Completely with an accessory dispensing kit.
*Benefits
Clean, drip-free cutoff
Greater process control
Better product quality, reliability and appearance
Less rework and fewer rejects
no fluid waste and mess
Simplified training for new workers
*Models
T&H-TH-2004L3 dispenser 110V-CE
T&H-TH-2004L3 dispenser 220V-CE
*Specification:
Standard: CE Approved
Length：<120 mm
ID Size: M5-M30
Drive : Precision motor
Control way: Foot pedal
Motor speed: 10～200 Cycles/minute
Repeatability: ±0.01mm
Frequency: 2-5sec/pcs
Input voltage: 1-7 bar (100 psi) maximum
Output voltage: 0.1bar-7bar
Input voltage: 110 VAC or 220 VAC
Internal Voltage: 24 VDC Weight: <10Kg
Size: 55 x 40 x 75（cm）
Operating Conditions:
Temperature: 5°C to 45°C (41°F-113°F)
Humidity: 85% RH at 30°C non-condensing
*Complete with an accessory dispensing kit
Power cord 1pcs
Air glue 1pcs
Foot pedal 1pcs
Dispensing tip 5pcs
Manual 1pcs
Applications:
Pneumatic components, connectors, screws, bolts, stud, screw, self-tapping screws, etc.
Apply liquid material:
Thread sealant, anaerobic adhesive, thread-locking adhesive, anti-loose plastic, etc.
|
:164/0