Safety Edge Sensor

Posted by:

UTICarmen

Location:

Pennsylvania

Ad Status:

Closed

Manufacturer:

Type:

Model:

Year (or range of years):

Condition:

Price (in US dollars):

Quantity:

Type of Seller:

Description:

Single and Dual-Channel
Safety Edge Controllers
for use with All Safety Edges and Safety Bumpers
• Power requirements
– 120 VAC or 24 VDC is acceptable for the SCC-1224 single channel units
– 24 VDC is acceptable for SCC-2124/2224 dual channel units
• Inputs
– Single channel units accept a single two-wire edge or bumper system
– Dual channel units accept 1 or 2 two-wire edge or bumper systems
• Outputs
– Single channel units have two safety outputs and one auxiliary output
for signaling
– Dual channel units have either 1 or 2 safety outputs, and either 1 or 2
auxiliary outputs with DIP switch selection for input channel relationship
• External Device Monitoring –EDM is provided on all units with a N/C loop
between Z1 and Z2
• Monitored Reset Modes
– Monitored manual reset mode that requires closure of the reset circuit
followed by opening of the circuit is available on all units
– Automatic reset mode that occurs upon closure of the reset circuit is
available on all units
• Delayed Auxiliary Output – Delayed opening of the auxiliary output for
reversal of a door or gate may be selected on all units