|
• 2 - Head machining Center: Work area cap. X-axis: 5,300 mm (208.7") Length, Y-axis: 1,300 mm (51.2"), Z-axis 135 mm (5.3"). The head travels on THK linear motion guides on all axes, feed speed on X-axis is 263 FPM, Y-axis 196 FPM and Z-axis 64 FPM.
• (2) independent Operating Heads: (1) Head equipped with (20) independent vertical spindles in "X" direction, (1) 8 HP ATC electro spindle (9,000 - 18,000 RPM), (1) 12-tool ATC automatic tool changer.
• (1) Head equipped with (20) independent vertical spindles, spindles in "Y" direction, (1) 8 HP ATC electro spindle (9,000 - 18,000 RPM).
• Routers powered by an frequency inverter w/programmable 9,000 - 18,000 RPM constant power spindle speed, RH or LH rotation.
• Worktable: (8) Moveable support rails, (3) matrix style vacuum cups per rail, (24) total vacuum cups using rubber seals in the matrix of the vacuum cup, (8) pneumatic backstops, (2) movable pneumatic side stops, and the dual central zero-stop create (2) working zones.
• "WEEKE" Windows based IPC controller for (3) axes; linear, circular & helical interpolation; NUM programmable logic control operating system, color graphic monitor, industrial keyboard for data entry, 3-1/2" floppy disk drive, EtherNET interface for possible LAN connection possible to office PC, RS-232 serial interface for simple PC connection; all mounted in separate free-standing control cabinet, machine can be programmed off-line with the same intuitive icon driven software that the operator has on the machine controller.
• Complete with: 100 cbm/Hr Vacuum pump, man-height safety enclosure around rear & sides of machine, 2-zone safety mats (will stop machine if operator enters work area). - Electric: 460 V, 60 Cy, 3 Ph. [BP-011209]
|
:59/0