AXI = 5DX series 5400 Hi-resolution Software Version: 8.4.2
december 2003
AXI = 5DX series 5400 Hi-resolution
Software Version: 8.4.2 july 2006
Performance specifications
Total test speed 80 to 140 joints/second (approximately 1.0 in2/sec) (1)
Image acquisition time Up to 5 images per second
Alignment time 3 to 8 seconds (depending on panel size)
Load/unload time 12 seconds per panel for pass-through mode,
15 seconds for pass-back mode
Surface map time
(points/second)
Up to 5 points/sec (typical map density is 1 point/645
to 2,580 sq mm (1 to 4 sq in))
False call rate Typical false call rate of 500 to 1000 ppm (2)
Minimum feature detection
capability
Joint pitch Model 5300: 0.3 mm & up (0.012 in & up) (3)
Model 5400: 0.2 mm & up (0.008 in & up) (3)
••
Short width (at 5 mm (0.2 in) FOV) (4) Model 5300: 0.045 mm (0.0018 in)
Model 5400: 0.035 mm (0.0014 in)
••
Solder height 0.0127 mm (0.0005 in)
SPECIFICATIONS
(1) Total test speed varies depending panel size and the density of the component layout and of the panel;
estimates include image acquisition, alignment, surface map and board handling time
(2) False call rates vary depending on program quality, adherence to on-going program and hardware
maintenance, panel volume and mix
(3) Assuming pad width is 50% of pitch
(4) The reported values for minimum feature detection assume that the feature is in a single plane of focus and
that there are no X-ray absorbers in the X-ray path or in the immediate area of the feature other than those
found in a typical multi-layer printed circuit board
Fully operational, remains powered up, installation and service contract available with machines.
Company: Fix Trade BV Contact Name: Peter-Paul de Wildt Status:Premium Member
adid=110854
onClick='enterWindow=window.open("/favorits.php?adid=110854","Favorites","width=400,height=200,top=200,left=200"); return false'
onmouseover="window.status='Put this Ad in My Favorites'; return true;"
onmouseout="window.status=''; return true;">
Ad Number: 110854
About this Agilent series 5400 listing - This is a for sale classified ad for a used, surplus or second hand Agilent series 5400 equipment. It is posted by one of our members. To contact the seller of this item please click the WebMail icon at the bottom of this Agilent series 5400 listing or view this user's member profile for detailed contact info.
:499/10
