|
Sikama Falcon 5/C Multipurpose Conduction+Convection Reflow System
The unit is in like-new condition and the main unit is guaranteed to work. It has the Oxygen Level Monitoring Sample Port Option with the analyzer. There is no software but the RS-232 port is installed. It has a water-flow safety interlock as well.
The Unit's Facility Tag Reads (the tag is very hard to read):
Power Requirements: 208 VAC, 7.8 Amps ws @ 240 VAC, 3-Phase, 4-Wire, 50-60 Hz
Known Installed Option:
Part Number: 1281
Description: "Sampling" Port to attach to Oxygen Monitor, Installed - 1 zone
Overview:
Don't let the small size of the Falcon 5/C fool you. This full-featured Conduction+Convection table top machine produces big results, and gives you exceptional value for your reflow dollar. Our patented design for balanced heating and cooling means low cost operations on production runs of substrates up to 5" by 5.75", and the 5/C's 420°C maximum heat will handle fluxless gold tin reflow, singulated ball reflow of BGA's, fixtured double-sided boards, large microwave components, and various substrate materials. With conductive heating from below, convection heating from above, and precise temperature calibration and atmospheric purity, you get total control of your reflow work.
You can work right-to-left or left-to-right on this semi-automatic system, so fitting the 5/C into your production line is easy. The 5/C's seven zones include a cooled loading platform, four Conduction+Convection heat zones, a top and bottom liquid-cooled offload platform. Independent set point controls for each zone offer exceptional profile flexibility and consistent, precise temperature control. Our sweeper bar transport includes a dwell mode for timed delay of movement through any zone.
Specifications:
Heating Zones: 4
Cooling Zones: 2
Loading Zones: 1
Total Number of Zones: 7
Platen Size: 5 in. x 6.5 in. (125 x 162 mm)
Maximum Substrate Size: 5 in. x 5.75 in. (125 x 144 mm)
Speed Mode (Inches Per Minute): 3 to 50 in/min. (7.5 to 125 cm/min.)
Time Mode (Dwell & Travel Time): 1 sec. to 99 min. 59 sec. (per zone)
Temperature (Standard): Up to 420°C
Temperature Accuracy: ±2°C
Warm-up Time to 230°C: 10 minutes
Coolant Flow: 0.5 to 2 GPM (2 to 8 liters/min.)
Alarms: Over/Under Temperature, Gas, Coolant, Motor Torque
Parts Flow (Specify When Ordering): L to R or R to L (I am not sure what this system is configured for)
Gas Consumption: 120-150 cubic feet per hour
O2 Level: 10 PPM, 0.25 inch opening
Voltage (Specify when Ordering): 200 to 240 VAC, 50/60 Hz, 1 or 3 Phase
Start-up Power (kW): 11kW @ 240 VAC
Power Consumption: 50% or less
Basic Unit Weight: 200 lbs. (91 Kg)
Basic Unit Dimensions: L 53 x W 25 x H 26 inches (134.6 x 63.5 x 66 cm)
|
:74/0
