|
High-performance single head axial lead component insertion machine with sequencer
XG-4000/AI/THT/PCBA/SMT
Feature:Consist of second generation axial sequencer and axial insertion machine. Sequence the components from tape on the chain conveyor as programme and feed insertion machine directly, no need make into tape again. The insertion head is steady, the rotary table is movable, include vertical or horizontal direction, ensure precisely insert components in PCB. Application software is designed by our company, control all the operation through one computer.
1 Insertion rate 26000PCS / H
2 Non-performing rate Less than 300 PPM
3 Insert direction Parallel 0°, 90°, 180°, 270°.
4 Components span Two-Hole Distance 5.0mm-20mm (Insert jumper wire can reach 5mm-30mm)
5 PCB Size (Min)50 mm x50mm(Max)450mm x 450mm
6 PCB thickness 0.79mm-2.36mm
7 Components available Capacitors, transistors, diodes, resistors, fuse and so on, must be Tape packed electronic components.
8 Jumper Wire (JW) Independent feed device, no need sequencing..diametre 0.5mm-0.7mm copper wire plated with tin.
9 Clinch Length 1.2-2.2MM (adjustable)
10 Clinch degree 0-35° (adjustable)
11 Machine Size (L×W×H) Main machine 1730mm×1580mm×1600mm
Station: 510mm×1000mm×1410mm (10 stations)
12 Machine Weight: main machine 700kg, station: 750kg (40 stations)
13 Power supply 220V, AC(single phase) 50/60HZ, 1.5KVA
14 System Protection UPS, keep machine run 15 minutes without power
15 Working Power 1600W (Energy-saving)
16 Air pressure 0.6-0.8 Mpa
17 Air consumption 0.3 m3/minute
18 Circumstance temperature 5-25°
19 Machine noise 65 dB
20 Coordinate correction Machine vision systems, multi-point MARK vision correction.
21 Driving system AC Servo AC motors
22 Data input USB interface input (EXCEL format)
23 Control System English version interface (WINDOWS system control platform)LCD monitor
24 Rotary table Clockwise or anticlockwise
25 PCB transfer mode Manual / automatic optional
|
:556/3