|
Max X 14" (355.6mm)
Max Y 14" (355.6mm)
Max Z travel 2.0" (50.8mm)
Resolution 0.0005" (0.025mm)
Table flatness 0.005" 0.127mm)
Drive system Lead screw drives and DC servo motors with closed-loop motion control in X, Y and Z axis
Max X, Y axis speed 1414: 8 IPS (203mmPS)
1818: 10 IPS (254mmPS)
Acoustic noise 68 DBA
DISPENSING Dot placement
accuracy +/-0.003" (0.076mm) @ 3 sigma
Dispensing method Rotary Auger, Multi-Piston Pump and/or Time/Pressure
Dispensing rate 13,000 dots/hour ** 16,000 dots/hour**
Typical applications Solder paste, surface mount and conductive adhesives, gasketing, and
encapsulations (glob top and flip chip underfill)
COMPUTER
Windows®-style icon based software, designed for dispensing applications (Dot,
Line, Arc, Circle, Round and Square Fill patterns)
Computer IBM compatible
Sub patterns 400 per program
Program method Teach mode with trackball; floppy disk from CAD data, download via RS232
FACILITY REQUIREMENTS
Power 115 Volts, 60 Hz, 10 Amps
International 220 Volts, 50 Hz, 10 Amps
Pneumatic Min 80 PSI, 1CFM, 10 Micron Filtered Air
|
:751/3
