6" x 18", HARIG AUTOSTEP III, Electro-Magnetic Chuck,

Posted by:

Toolco

Location:

U.S.A.

Ad Status:

Closed

Make:

Type:

Model:

Year (or range of years):

Price (in US dollars):

Description:

SPECIFICATIONS

Width & Length Ground ........................ 6" X 18"

Vertical Working Height Under 7" Wheel ............ 12"

Longitudinal Table Travel ..................... 18-3/4"

Longitudinal Table Speeds ................ 0 TO 70' FPM

Auto Cross Feed Per Table Pass ............. 0 TO 3/32"

Downfeed of Grinding Wheel Rate ............. 0.9"/min.

Rapid Up/Down Traverse .................... 2-1/2"/min.

Auto Downfeed Increment per Pass .... 0.0001" TO .0099"

Grinding Wheel ..................... 7" X 1/2" X 1-1/4"

Maximum Grinding Wheel Diameter .................... 8"

Floor Area Operating Space .................. 71" X 45"

Weight (approximate) ........................ 1,500 lbs



EQUIPPED WITH:

Harig "Autostep III" Automatic Incremental Downfeed Control Featuring:

-5 Digit Thumbwheels to Preset Total Depth

-2 DIGIT Thumbwheels for Setting Downfeed Increment

for Feeding @ Both Left & Right, or Left Only

or Right Only

-Thumbwheel to Preset 1 to 9 Auto Sparkout Passes

-Automatic Cycle Including Rapid Return Starting

Position

-Jog Button for Repositioning 0.0001" Per Jog

-Rapid Traverse Button - Digital Readout

DISPLAY

-"Autostep III" Feeds in Both Plung or Surface

GRINDING MODES

-Hydraulic Table Traverse

-Over the wheel dresser

-Electro-Mechanical Cross Feed (Dial Controlled)

-6" X 18" Magna - lock Fine-Division Permanent Electro Magnetic Chuck

-Coolant

-Work Light

-1 HP 3/60/230-460 Volt Harig Super-Precision Direct

Drive Cartridge Type Spindle



** Note: the Auto Feature is NOT functioning correctly, the machine

is offered "as is".



**See attached Warranty, Terms, Machine Use & Safety.

**These specifications are subject to verification upon inspection.








Our stock number:4305