|
Model Number: 3A
SPECIFICATIONS:
Horsepower: .............................. 60 HP @ 1775 RPM; 30 HP @ 880 RPM
Swing Over Carriage: ..................... 18"
Swing Over Carriage Guard(effective): .... 23.5"
Maximum Bed Swing(without carr. way covers): 24.5"
.500 LB Overhead Jib Hoist
Cross Travel: ............................ 14.375"
Cross Feeds:
Low: .005,.007,.009,.012,.020,.027,.036,.050
High: .017,.023,.030,.042,.067,.090,.122,.167
Power Rapid Traverse: .................... 6 FPM
Longitudinal Travel: ..................... 51"
Longitudinal Feeds(16):
Low: .005,.007,.009,.012,.020,.027,.036,.050
High: .017,.023,.030,.042,.067,.090,.122,.167
Power Rapid Traverse: .................... 16.5 FPM
Hexagon Turret
Size Across Flats: ....................... 17.250
Bar Capacities:
Round: ................................... 6" Diameter
Flanged Bushings for Bar Holders: ........ 3" Diameter
Minimum Size Boring Bar: ................. 1" Diameter
End of Spindle to Turret Face(Max Dist.): 59" or 58.625"
Length Turned(Max Dist.): ................ 43
Longitudinal Travel: ..................... 51"
Longitudinal Feeds(16):
Low: .012,.009,.007,.005,.050,.036,.027,.020
High: .042,.030,.023,.017,.167,.122,.090,.064
Power-Rapid Traverse: .................... 34.5 FPM
Cross-Slide Traverse: .................... 8.5"
Cross Feeds:
Low: .007,.005,.004,.003,.029,.021,.016,.012
High: .024,.017,.013,.010,.096,.070,.052,.038
Spindle Speeds(2 Speed Motor)
32 Speeds: ............................... From 12-851
Threads per Inch: ........................ From 1-32
EQUIPPED WITH:
Single Compound
Cross Sliding Turret
Taper
21" 4 Jaw Chuck with 6" Hole
**See attached Warranty, Terms, Machine Use, and Safety.
**These specifications are subject to verification upon inspection.
Our stock number:4440
|
:83/0