|
The Model BPS-1649C and BPV-3949C Turret Milling Machines are
suitable for vertial milling, angular milling, drilling, boring
diesinking. The vertical head may be tilted to 90 degrees from
the vertical position to accommodate a wide range of work
requirements. A wide range of Spindle speeds meets the
machining requirements of various materials and working
conditions. The BPS-1649C has 16 separate speeds from 90 to
5,600 and the BPV-3949C is infinitely variable from 60-4,300 rpm.
Power down feed and power up feed. Counter balanced quill and
spindle provides extreme sensitivity for operator touch.
Micrometer depth stop is graduate in 0.001 inches. Machines
castings offers maximum rigidity and stability by incorporating
extra wide slidways and extra heavy ribbing in the construction.
Each machine casting in aged and stabilized.
SPECIFICATIONS:
Type: .................................. STEP PULLEY
Table Size : ........................... 9" x 49"
Spindle Speeds (No.) RPM ............... (16) 90-5600
Step Pulley Models:
Spindle Speeds (No.) RPM. .............. N/A
Variable Speed Models:
Longitudinal Travel .................... 36"
T-Slots (Number) & Size ................ (3) 5/8"
Saddle-Cross Travel .................... 12"
Knee Travel ............................ 16"
Spindle/Quill Travel ................... 5"
Spindle Taper .......................... R-8
Spindle Diameter ....................... 3-3/8"
Spindle Feed (No.) In./Rev. ............ (3) 0.0015", 0.003", 0.006"
Spindle to Table (Min.-Max) ............ 2" - 18"
Spindle to Column (Min. - Max) ......... 6-34/" -18-3/4"
Head Swivel with Locks (RH/LH) ......... 90 Degrees / 90 Degrees
Head Tilt (Forward & Back) ............. 45 Degrees / 45 Degrees
Ram Turret Swivel ...................... 360 Degrees
Ram Travel ............................. 12"
Motor & Electrics ...................... 3 HP 220V 3 Phase
(OPT) 2HP 220V 1 Phase
Prewired ............................... 220V 3 Phase
Machine Dimensions ..................... 86" x 68" x 67"
Floor Space Required (Max.) ............ 92" x 72"
AVAILABLE OPTIONS:
- ALIGN POWER FEED INSTALLED
- ALIGN POWER FEED & MITUTOYO DRO INSTALLED
- ALIGN POWER FEED & SARGON DRO INSTALLED
- ALIGN POWER FEED & ACU-RITE DRO INSTALLED
- ALIGN POWER FEED & NEW ALL DRO INSTALLED
- STANDARD MILL PACKAGE "A" --Mill package "A" includes 2 Axis
Mitutoyo DRO, ALIGN table power feed #PF-135X, 6" anglock
vise w/swivel base, 11 pcs R8 collet set, and Clamping kit.
**See attached Warranty, Terms, Machine Use & Safety.
**These specifications are subject to verification upon inspection.
Our stock number:3557
|
:20/0
