Posted by:

Toolco

Location:

U.S.A.

Ad Status:

Active

Make:

Type:

Model:

Year (or range of years):

Price (in US dollars):

Description:

MODEL: EM 28-60



SPECIFICATIONS:

TABLE:

Working Surface .................................. 28" X 83"

Size Over All .................................... 28" X 97"

T-slots (Five) ................................... 13/16" Wide

Distance Between T-Slots ......................... 5"

Floor to Top of Table ............................ 32"

Capacity ......................................... 10,000 LBS.

RANGES:

Longitudinal Table Travel ........................ 60"

Cross Travel of Cross Slide ...................... 30"

Vertical Travel of Spindle Carrier ............... 14"

Limiting Dimensions:

VERTICAL:

Top of Table to Spindle Nose ..................... (Max.) 26"-(Min.) 12"

Top of Table to Underside of Cross Slide Ways .... 17-7/8"

HORIZONTAL:

Throat (Min.) 23-1/2" -(Max.) 38-1/2"

Spindle End - National Standard .................. No."50"

SERIES TAPER HOLE:

Outside Diameter of Nose ......................... 5-1/16"

Diameter of Through Hole ......................... 1-1/8"

TAPER HOLE:

Diameter of Large End ............................ 2-3/4"

Diameter of Small End ............................ 1-9/16"

Taper Per Foot on Diameter ....................... 3-1/2"

SPINDLE HP: 15 Hp

SPINDLE SPEEDS:

(Selected by Dial & Back Gear Lever) ............. 16

Low Speed (Geared) Drive ......................... 22 to 550 RPM

High Speed (V-Belt) Drive ........................ 52 to 1300 RPM

Feeds (Number --- Hydraulic)...................... Infinite

Range -- Inches Per Minute ....................... 1" to 25"

Table and Cross Slide ............................ or 1/2" to 12-1/2"

Spindle Carrier (Extra) .......................... 1" to 15"

POWER RAPID TRAVERSE:

Rate--Inches Per Minute--Table & Cross Slide ..... 120"

TANK CAPACITIES:

Hydraulic Oil Tank, In Rear Base ................. 55 Gallons

Lubricant, in Front Bed .......................... 6 Gallons

Lubricant, in Cross Slide ........................ 10 Gallons

Coolant .......................................... 32 Gallons

Overall Dimensions ............................... 171"W, 108" H, 127.78 W

Weight (approximate) ............................. 25,000 lbs

SOLD AS INSPECTED



**See attached Warranty, Terms, Machine Use & Safety.

**These specifications are subject to verification upon inspection.








Our stock number:4016