BCP/JDSU Uniphase 320A-33ST Optical O-E Receiver

Posted by:

testeqe

Location:

Arizona

Ad Status:

Active

Manufacturer:

Type:

Model:

Year (or range of years):

Condition:

Price (in US dollars):

Quantity:

Type of Seller:

Description:

BCP (Broadband Communication Products) now JDS Uniphase 320A-33ST High Gain 3 GHz O/E Optical Receiver for 1550 nm Wavelength

The unit is Intel surplus. The unit powers up but we do not have the ability to formally test it. Guaranteed non DOA.

The Receiver's Serial Number Tag Reads:
Model Number: 320A-33ST
Serial Number: 160
Manufactured: August, 1999

320A Receiver Key Features:
# Detector bandwidth DC 3 GHz
# High O/E gain (2500 V/W)
# Limiting amplifier included
# No gain or offset adjustments needed

320A Application:
# O/E conversion for transmitter testing

320A Receiver Description:
The receiver detects and converts optical signals into electrical signals for the purpose of transmitter waveform analysis and testing, including error rate testing. It is optimized for analysis of high-speed, low-level optical signals from single-mode fiber sources. The high bandwidth (3 GHz) and high gain (2500 V/W) enable detection and analysis up to 2.5 Gb/s signals at levels down to below -30 dBm. The receiver is also equipped with a high-level input port for direct connection of laser sources at power levels up to +3 dBm without overload. The Model 320A 3 GHz O/E Receiver is the one solution that provides users with a low-cost, high-quality instrument for optical eye pattern analysis and testing at low to high power levels.

The receiver consists of a 3 GHz bandwidth optical-to-electrical (O/E) converter (1100 to 1600 nm) and a 3 Gb/s limiting amplifier. The detector out port for the O/E converter is DC coupled and automatically nulled to < ±100 µV DC. The nulling is automatically performed when the receiver does not have an optical input.