|
Brewer Science / Cost Effective Equipment (CEE) 100CB Hotplate/Spinner (Coat Bake Track)
The unit was removed from service in working condition. It powers up and seems to work. I tested the hotplate for temperature but do not have the expertise to test it after that. It is used, Intel Surplus. The internal drain is not connected and will need to be reconnected. There are some screws broken off in the back but the unit can still be serviced.
The Unit's Serial Number Tag Reads:
Model Number: 100CB
Serial Number: 2041239
Power Requirements: 115 V, 1725 W
CE Marked: Yes
Additional Accessories & Information:
# EFD Air Pressure Valve, 70 PSI (40 bar), Serial Number: 315909
# CEE DSD/1 Syringe Dispenser
# EBR, BSR, Dispense Modules
# Apache Stainless Steel Fluid Tank, MAWP 165 at 100°F, MDMT -20 at 165 PSI, Serial Number: 32786-8, Material: T304L, Year: 2003
# Apache Stainless Steel Fluid Tank, MAWP 165 at 100°F, MDMT -20 at 165 PSI, Serial Number: 32711-3, Material: T316L, Year: 2003
# EFD 30cc Disposable Reservoir Ultra Dispensing System
# Cox VBM 200X MR Dual Component Sealant Application (200 x 200 ml. Dedicated 1:1 Mix Ratio, High Viscosity)
Key Features:
# Bench top unit.
# Multi-substrate capabilities with no retooling.
# Manual and automatic dispense
# Equipped with hot plate for curing
# 6000 RPM maximum speed
# 0.5" to 8" wafers
# 300°C maximum hot plate temperature
# Three bake methods: proximity, soft contact and hard contact
# Stores up to 10 user programs
|
:1408/8