Alcatel PTM 5101 Turbo Pump & CFV-100 Controller

Posted by:

testeqe

Location:

Arizona

Ad Status:

SOLD

Manufacturer:

Type:

Model:

Year (or range of years):

Condition:

Price (in US dollars):

Quantity:

Type of Seller:

Description:

Adixen/Alcatel PTM 5101 Turbomolecular Ceramic Bearing Pump with a CFV-100 Controller

Specifications are from Alcatel but are for a 5100 (not a 5101) and may vary slightly due to upgrades, options, or revisions this unit may or may not have.
This turbo pump and controller came out of a working carbon evaporator system. The pump spins freely and the controller powers up and starts the fan. I do not have the proper equipment or expertise to test the pump. The cable with it is a 2.5 meter cable. The cable that connects to the fan has a break in it that can be taped using electrical tape or coated with shrink tube.

The Pumps's Serial Number Tag Reads:
Type: PTM 5101
Serial Number: D3003 44

The Controller's Serial Number Tag Reads:
Model Number: D8523
Serial Number: C0395

The Controller's Hour Meter Reads: 23100.07 hours

Applications:
# Mass spectrometry
# Gas analyzers
# Research and development
# Leak detection applications

Key Features:
# Operating in any orientation
# Air cooled
# Low 27,000 RPM rotational speed improves reliability
# Simplified maintenance for total on-site service (serviceable without rebalancing of rotor).
# Compact - easily installed in restricted spaces
# Start-up time of approximately 3 minutes

Specifications (for 5100 ISO Flange):
Pumping Speed for P < 10-4 mbar:
N2: 100 l/sec
He: 60 l/sec
H2: 40 l/sec
Ultimate Pressure: 5 x 10-9 mbar
Nominal Continuous Inlet Pressure (N2)*: 5 x 10-3 mbar
Nominal Continuous Exhaust Pressure: 5 x 10-2 mbar
Compression Rate:
N2: 8 x 107
He: 2500
H2: 300
Starting Time: 3 mins
Rotational Speed: 27,000 RPM
Recommended Forepump: Alcatel 2004 A
Maximum Ambient Temperature: 35°C
Cooling Method: Air
Weight:
Pump: 3 kg
Controller: 3 kg
Maximum Bake-out Temperature on Flange: 100°C
Maximum Distance between Pump and Power Supply**: 50 m
Power Requirements: 115 V, 5-60 Hz, Single Phase
Power Consumption: 150 VA
Connection Flanges:
Inlet: NW100
Exhaust: NW25
Notes:
*: Value depends on forepump used
**: Optional.