used PRC FH 1500 HP for sale | Laser with 52ins dia. NC Rotary Table

PRC Corporation
Stock Number: 201912
Age: 1987

PRC CORPORATION SERIES FH LASER
MODEL: FH 1500 HP
NEW : MAY 1987
HOURS : 18,761
CONTROL: LASERDYNE SYSTEM 84

ENCLOSURE SIZE : 44" WIDE X 55" HIGH X 108" L

CAPACITY :
MAX PART INCLUDING FIXTURE :
DIA. 52"
HT 28" W
WT 400 LBS
MOMENT 2400 in LBS

POWER RANGE : 0 - 1350 WATTS

VOLTAGE 480 / PHASE 3 / HZ 60 / AMPS 30

WATER
FLOW RATE - 5 GPM
PRESSURE - 60 PSI
TEMP - 60 deg. F

GASSES He N2 CO2 AIR
PSI 60 60 60 60

TECHNICAL CHARASTICS
WAVE LENGTH - 10.6 MICRONS
APPROX. WEIGHT - 5000 LBS
POWER - 1350 WATTS CW (MAXIMUM)
MODE - TEM OR TEM
POWER STABILITY - + 2% AT FULL POWER RELATIVE TO A MEAN VALUE ESTABLISHED OVER 8 HOURS.
POWER RANGE - 0 - 1350 WATTS
BEAM DIVERGENCE - LESS THAN 1.5 MRAD
BEAM SIZE - CLEAR APERTURE 18mm MAX.
POLARIZATION - VERTICALALLY PLANE POLARIZED
PULSING - 5 KHZ (STANDARD)
INPUT - ANALOG DIGITAL - POWER CONTROL
OUTPUT DIGITAL - POWER INDICATION & SYSTEM

INCLUDES:
AFC MODEL AFC C-3 LASER HEAD
VERTICAL 52" dia. 4TH AXIS CNC ROTARY TABLE

THIS UNIT IS IN BEAUTIFUL CONDITION, USED FOR AEROSPACE APPLICATION, HOWEVER THERE IS A PROBLEM WITH LASER POWER UNIT. MAINTENANCE REPLACED THE 15V LOW VOLTAGE UNIT, AND THAT DID NOT RECTIFY THE PROBLEM, THEREFORE IT IS PROBABLY IN THE HIGH VOLTAGE SECTION (POSSIBLY 20,000 VOLTS) AND THEY DON'T WANT TO GET INVOLVED IN THAT AREA AS THEY DON'T HAVE THAT MUCH EXPERIENCE WITH LASERS.

ANYONE WHO PURCHASED THIS UNIT WOULD HAVE TO GET AN EXPERIENCED LASER TECH TO CHECK IT OUT.