Posted by:

Simco

Location:

Europe - All

Ad Status:

Active

Manufacturer:

Type:

Model:

Year (or range of years):

Condition:

Price (in US dollars):

Quantity:

Type of Seller:

Description:

Working medium: water at a pressure of 320 bar.
It has run for products on the slopes of the saw to cut to size and ends forcer of bars. It co-operates with the heater for induction heating of ingots.

- Recypients hole diameter 210 mm
- Diameter of products 14 - 80 mm
- Max width of flat bars 120 mm
- Max length 16 m
- Originating ingot diameter 205 mm
- Max length of originating ingot 900 mm
- Recypients heating temperature to 450°C
- Q capacity 3-4 t / h
- V operating gear working 2-50 mm / sec
- V operating sterile to 250 mm / sec
- V operating return up to 350 mm / sec
- Pumps - Q = 516 l / sec, 320 kW, 320 bar

Induction heater ingots with a diameter of 205 mm

Year of manufacture: 1972
Modernization of power and control in 1997.
- Power transformer type TONb 1600-10
- Power 1600 kVA
- 3 - Phase
- Two-ply heating inductor, single-phase, power of 400 kW
- Heating temperature 450 - 900 °C
- Induction coils in diameter originating ingot 205 mm
- Length of the oven 4 m

Continuous - resistance furnace for annealing / stabilizing rods and tubes of copper alloys

- The power of heating elements 220 kW
- Fan motor power 19.6 kW
- Maximum temperature of 650°C
- Length of charging roller table 9 m
- Width of charging roller table 1 m
- Distance between charging roller table rolls 0.5 m
- The length of tubes and rods 2 - 8 m
Regulation of temperature in the field of 20 - 650°C.
The time of staying the material in the heating chamber is set by the rotational speed of charging roller table.