2006 Daewoo Puma 300LB | used Daewoo CNC

SPECIFICATIONS:
CAPACITY:
SWING OVER BED -------------------------- 23.2"
SWING OVER CARRIAGE --------------------- 17.7"
DISTANCE BETWEEN CENTERS: PUMA 300LB ---- 52.8"
MAX. TURNING DIAMETER ------------------- 15.7"
MAX. TURNING LENGTH: PUMA 300LB --------- 51.1"
SPINDLE:
SPINDLE SPEED --------------------------- 35-3,500 RPM
SPINDLE NOSE ---------------------------- A2-8
DRAW TUBE I.D. -------------------------- 3.03"
SPINDLE BORE DIAMETER ------------------- 3.54"
A.C. SPINDLE MOTOR (30 MIN.) ------------ 30 HP (HIGH TORQUE)
MAX. SPINDLE TORQUE --------------------- 347 FT-LBS
BED, SADDLE & CROSS SLIDE
X-AXIS TRAVEL --------------------------- 11.1"
Z-AXIS TRAVEL: PUMA300LB --------------- 52.4"
ANGLE OF SLANT BED ---------------------- 45 DEGREES
X/Z AXIS GUIDWAY SPAN ------------------- 12.6" / 15.0"
TAILSTOCK GUIDWAY SPAN ------------------ 10.4"
X/Z AXIS RAPID TRAVERSE RATE ------------ 630 IPM / 945 IPM
X/Z AXIS BALL SCREW DIAMETER ------------ 1.3" / 1.6"
MAXIMUM FEED THRUST (X/Z) --------------- 2,710 LBS / 3,980 LBS
X-AXIS REPEATABILITY -------------------- +/- 0.00006"
Z-AXIS REPEATABILITY -------------------- +/- 0.00008"
TURRET:
NUMBER OF TOOLS ------------------------- 12
TURNING TOOL SHANK SIZE ----------------- 1.0"
BORING BAR DIAMETER --------------------- 2.0"
TURRET INDEX TIME -- (NEXT STATION) ----- 0.15 SEC.
TOOL SELECTION -------------------------- BI-DIRECTIONAL
TURRET INDEX REPEATABILITY -------------- +/- .0005 DEGREE

TAILSTOCK:
TAILSTOCK QUILL DIAMETER ---------------- 3.9"
TAILSTOCK QUILL STROKE (PROGRAMMABLE) -- 3.9"
MAXIMUM TAILSTOCK QUILL THRUST/
MAXIMUM HYDRAULIC PRESSURE ------------ 2,680 LBS / 580 PSI
TAILSTOCK SPINDLE TAPER ----------------- MT #4 BUILT-IN
MOTOR ------------------------------------- 30 HP

EQUIPPED WITH:
-FANUC 21iTB
-10" 3-JAW KITAGAWA CHUCK
-SCHUNK THL-3 SELF CENTERING STEADY REST (.79 - 6.49" CAP.)
-BRACKET FOR STEADY REST
-145 PSI COOLANT PUMP
-PROGRAMMABLE TAILSTOCK
-AUTOMATIC TOOL PRESETTER