|
GTCNC-150IT-II
CNC LATHE CONTROLLER
FEATURES
*Controllable axes:2-5.
*Linkage axes: linear 2-5, circular 2 axes.
* 32 bits 200MHz ARM Industrial microprocessor
*32MB user memory
*8.4 inch TFT colorful LCD display.
*Real-time and all-round self-diagnosis function.
*Feed per minute, feed per revolution.
*Metric system, English system input mode.
*Linear, circular, thread interpolation can realize machining of metric/inch single/ multi-thread, taper thread, end-face thread, variable pitch thread, continual thread
*Multiple Compound cycle instructions, such as ex-circle rough turned compound cycle, head face rough turned compound cycle, complex type outline rough turned compound cycle, outer diameter/inside diameter /grooving compound cycle, thread cutting compound cycle etc
*Automatic backlash compensation and storage type pitch error compensation. Tool length automatic compensation, tool radius compensation.
*Set the max speed and up-down speed of each axis independently.
*Shift of programmed unit between metric and British mode
*Setting of auxiliary axis’ angle and displacement programme.
*Multiple coordinate system setting.
*Soft and hard limit function for max stroke.
*Powerful tool management function: Managing 99 tools and can control diverse tool post (such as electrical, hydraulic, servo).
*Display current time, single piece time and running time.
*Multiple interpolation function and M, S, T function.
*Parameter, software backup and upgrade function.
SPECIAL ADVANTAGE
>SPEED
*Max rapid traverse : 60m/min
*Max cutting speed: 20m/min
*Program preview, realizing smooth connection between blocks
>PRECISION
*Screw pitch compensation, improving machining precision to the most
*Pulse equivalent: max precision can be set as 0.001mm
>INTERFACE
*Embedded PLC with I/O number 118 x 46, users can free to edit.
*USB port,RS232 port supply DNC function by transmit rate 115200bit.
*MPG on board or separate MPG are available.
*Dual channel control of spindle speed, can control two spindle Units and diverse tool post.
>OPERATION
*Full-screen editing interface and foreground-background processing operation, which can do programming, parameter adjustment etc at the same time
*2D/3D graphic preview or simulating operation before machining, coordinates display, free shifting between 2D/3D graphic; graphic can be scale up/scale down, translate and rotate freely.
*Multilevel password protection, such as program, parameter protection to convenient equipment management
*Start machining at random block or tool number
*Compatible with popular international CNC system in instruction code and most program can be run directly without amendment
|
:165/0
