|
KOLOMNA Vertical Turret Lathe
Model: KV 159
Manufacturer: KOLOMNA
Location: EUROPE
Specification
Faceplate diameter: 8,750 mm,
Max swing diameter: 13,300 mm
Max. working dia. with side-hung carriage, normal position of gantry: 9,000 mm
Max. working dia. without side-hung carriage, normal position of gantry: 9,800 mm
Max. working dia. with side-hung carriage: 5,000 mm
Max. working dia. with side-hung carriage, extreme position of gantry: 12,000 mm
Max. working dia. without side carriage, extreme position of gantry: 13,300 mm
Max. gantry movement: 3,825 mm
Max. height of work piece: 4,900 mm Max. weight of work piece: 80 t
- Face plate rpm no more, than 6: 120 t
- Face plate rpm no more, than 2: 170 t Total cutting effort, dia.: 7,000 mm (20,000 kgs)
Faceplate rpm: 0.13 – 8.5
Number of mechanical steps: 3
Continuous regulation of drive, range: 1 - 4
Max. traverse movement: 4,000 mm
Traverse movement speed: 200 mm/min
Feed gear box: step less regulation Carriage speeds, mm/min
0,0384 – 3,84
0,384 – 38,4
1,5 -130
|
:252/4
