|
4,000 ton Kobelco (Kobe Steel) 4-Column
3-Cylinder Oil Hydraulic Pull-Down type Forging Press Re:23180
Designed & Built 1978 by Kobe Steel Ltd. – Japan
Cogging strokes per minute range..................... 80 – 120
Major specifications: metric standard
Rated forge tonnage.............4,000.0 m tons 4,400.0 s tons
Ram stroke .2,100.0 mm 82.7"
Max daylight 4,600.0 mm 181.1"
Table dimensions:
front-to-back 5,000.0 mm 196.8"
left-to-right2,350.0 mm 92.5"
table travel (either front or back)5,250.0 mm 206.7"
Column dims (square) 480.0 mm ea side ..18.9" ea side
Opening between the column shields
front-to-back .2,750.0 mm 108.3"
left-to-right...............1,450.0 mm 66.5"
Distance between the columns
front-to-back 3,020.0 mm 118.9"
left-to-right...............1,690.0 mm 108.3"
Column center to center distance
front-to-back 3,500.0 mm 137.8"
left-to-right2,750.0 mm 108.3"
Return cylinder diameters
internal 280.0 mm 11.0"
external............507.0 mm 20.0"
Sliding tool manipulator dims:
tool slide cylinder stroke..............2,500.0 mm 98.4"
tool manipulator width .2,120.0 mm 83.5"
length of tool changer.............9,250.0 mm 30.3 ft
Approx press dimensions
total length of press top to bottom..................... 12,756.0 mm ................................41.8 ft
floor level to topmost portion of press..................7,038.0 mm ................................23.1 ft
floor level to bottom of pit................................. 10,000.0 mm ................................32.8 ft
press length with moving table platform............. 20,900.0 mm ................................68.6 ft
press width w/sliding tool manipulator ............... 11,500.0 mm ................................37.7 ft
System hydraulic pressure ........................................315.0 Bar ........................... 4,575.0 PSI
Each hydraulic pump power rating (x7)......................350.0 kW ............................... 470.0 hp
Total hydraulic pumps power .................................2,450.0 kW ............................ 3,285.5 hp
also have 4 inch upsetter 35 spm 1951
3000t forging press, 1000t, 6000t, 7000t, 10000t, 4000t,5000t
My Store Address:
http://www.equipmatching.com/store/34464/indmachinery
|
:120/0
