|
CINCINNATI-MILACRON "MONOSET" TOOL & CUTTER GRINDER
MODEL MT,
SERIES "MONOSET"
EQUIPPED WITH:
1/4 HP MOTORIZED WORKHEAD, BIJUR LUBRICATION SYSTEM
LARGE COMPLIMENT OF TOOLING INCLUDING
COLLETS, CHUCK, WHEEL MOUNTS, ETC.
CATALOGUE SPECIFICATIONS:
COLLET WORK DIAMETER, MINIMUM .125"
COLLET WORK DIAMETER, MAXIMUM 1.25"
SWING OVER MAIN SLIDE, MAXIMUM 12"
WORK LENGTH CAPACITY:
BETWEEN SPINDLE & TAILSTOCK CENTER 6"
WORKHEAD, MAIN SLIDE TRAVEL 5.75"
WORKHEAD, OFFSET SLIDE TRAVEL, TOTAL 5.25"
WORKHEAD ANGULAR ADJUSTMENTS:
HORIZONTAL PLANE, TURNTABLE 235-DEGREES
VERTICAL PLANE, ABOVE CENTER 40-DEGREES
VERTICAL PLANE, BELOW CENTER 40-DEGREES
WHEELHEAD, LONGITUDINAL SLIDE TRAVEL 6"
WHEELHEAD, CROSS SLIDE TRAVEL . 7.50"
WHEELHEAD, VERTICAL SLIDE TRAVEL, TOTAL 9.50"
WHEELHEAD VERTICAL TRAVEL ABOVE CENTER. 4.25"
WHEELHEAD VERTICAL TRAVEL BELOW CENTER. 4.50"
GRINDING WHEEL DIAMETER, MAXIMUM 4"
(3) WHEELHEAD, SPINDLE SPEEDS, RANGE 4000 TO 8000 RPM
WORKHEAD, SPINDLE SPEED 436 RPM
WORKHEAD MOTOR, HORSEPOWER 1/4 HP
WHEELHEAD MOTOR, HORSEPOWER 1/2 HP
FLOOR SPACE REQUIRED, W X D 25" X 26"
WEIGHT, APPROXIMATELY 1525 LBS.
TERMS AND CONDITIONS:
SPECIFICATIONS AND EQUIPMENT SUBJECT TO VERIFICATION WITH CORPORATE APPROVAL
FULL PAYMENT DUE PRIOR TO MACHINE PREPARATION FOR SHIPMENT
SUBJECT TO AVAILABILITY
|
:1482/1
