5L Gisholt Masterline Turret Lathe with Extended Bed 9.5” bore, 200” Length From

Posted by:

indmachinery

Location:

U.S.A.

Ad Status:

Active

Manufacturer:

Type:

Model:

Year (or range of years):

Condition:

Price (in US dollars):

Quantity:

Type of Seller:

Description:

5L GISHOLT MASTERLINE Turret Lathe with Extended Bed
9.5” bore, 200” length from face of spindle to turret, 28” 4-jaw Pratt steel body chuck, cross sliding hex turret, steady rest, high pressure coolant system for deep hole boring.
New in 1956. Serial # 3405-8.

Specifications:
9.5” spindle bore, A1-20” spindle nose
40” swing over bedways
33.5” maximum swing over cross slide carriage
18” cross slide travel
200” from face of the chuck to face of hex turret
188” longitudinal travel of hexagon turret
12” cross travel of hexagon turret
26” way width on bedways
(24) speeds from 7 to 390 RPM
(16) longitudinal feeds from .005 to .044 IPR
(16) cross feeds from .003 to .022 IPR
60 HP main motor
Dimensions:
338” x 82” x 88”H floor space required
35,000 lbs. approximate weight
Machine includes:
28” Pratt Burnerd 4-jaw steel body chuck, 4-jaw spider-type chuck on rear of spindle, hydraulic speed select, power rapid traverse, hardened & ground steel box ways, Trav-a-dial on turret saddle, (2) steady rests with 14” ID, 2HP coolant pump, miscellaneous tooling for deep hole boring. High pressure coolant system includes 15HP IR 2x1.5x8B centrifugal pump with 21” x 144” x 16”D coolant reservoir, large quantity of tooling for a “two tube” drilling system

Note: the previous owner was boring from 2.8” - 7” ID x 8’ depth

NOTE: This quote is incomplete without accompanying Conditions of Sale.
All specifications and price subject to verification.



INVKRHSM050112

SEE OUR STORE BELOW FOR ADDITIONAL BIG BORE LATHES
hAAS tl4, ETC