|
9318-01 - EX780 Extruder Line Pipe
Serial Number: -01 Dummy Card: No
Header:
3.50 AMERICAN KUHNE REINFORCED TUBING LINE 1999 260000-IL
Description:
USED FLEXIBLE PVC REINFORCED TUBING LINE. NEW 1999. LINE CONSISTS OF:
(2) 3.5" AMERICAN KUHNE SINGLE SCREW EXTRUDERS, EACH 24/1 L/D. EXTRUDER MODELS ARE AK350, NEW 1999, SERIAL #1305, AND 1301. SERIAL #1301 IS EQUIPPED WITH ALLEN BRADLEY AC INVERTER 380/460 VOLT, 50/60 HERZ. EXTRUDER SERIAL #1305 IS EQUIPPED WITH EMERSON DRIVE, 380/480 VOLT. EACH EXTRUDER IS DRIVEN BY A 75 HP AC MOTOR, 230/460 VOLT. MOTORS ARE BELT DRIVEN TO GEARBOX WITH 17.65/1 RATIO. GEARBOX IS RATED AT 150 HP WITH 1.6 SERVICE FACTOR AT 1752 RPM INPUT. EXTRUDERS ARE ELECTRICALLY HEATED, AIR COOLED, INCLUDE HOPPERS WITH TOP CENTER FEED THROAT, NOMINTAL 4"X6" DIMENSION. FEED THROATS ARE WATER COOLED. EACH EXTRUDER EQUIPPED WITH TEMPERATURE CONTROL PANEL, (7) BARREL ZONES, (3) DIE ZONES AND MELT TEMPERATURE, MELT PRESSURE AND CLAMP PRESSURE.
EACH EXTRUDER EQUIPPED WITH CROSS HEAD DIES (SERIAL #1301 EQUIPPED WITH VACUUM PUMP FOR JACKETED LAYER ON TUBING).
DOWNSTREAM INCLUDES:
CONAIR 11" X 12" X 16' VACUUM SIZER, MODEL MT105-16-4, SERIAL #159410. NEW 2/16/2004, 460 VOLT AC INPUT.
10"X15"X20' STAINLESS STEEL COOLING TANK WITH RESERCULATION PUMP AND HEAT EXCHANGER, AND SECOND COOLING TANK WITH MULT-PASS CAPABILITIES, 10"X15"X20' WITH RESERVOIR TANK, RECIRCULATION PUMP AND HEAT EXCHANGER.
(2) ESI BELT PULLERS, 3"X20" WITH HAND WHEEL BELT POSITIONING, 4.4 HP DC MOTOR WITH MOTOR CONTROL AND RIGHT ANGLE GEARBOX.
LINEX JET A MARK INKJET PRINTER
GLENRO INC RADIANT PRE-HEATER LAST USED AT 1200°F. HEATER IS 2-ZONE, EACH 42" LONG X 3.5" WIDE.
SIDNEY TOOL AND DIE, 24 HEAD SPIRAL KNITTING MACHINE MODEL 1500. 1500 RPM HEAD SPEED, YARN PACKAGE IS 6-5/8" DIAMETER BASE, 6" TRAVERSE LENGTH 3 DEGREE 30 SECOND CONICAL ID CONE.
HAS 60" WIDE X 60" DIAMETER SINGLE POSITION SPOOL COILER INCLUDING SPARE SPOOLS.
INCLUDES CONTROLS AND MOTORS.
|
:237/0