|
Sunflo Series P-2000
Hi-Pressure Centrifugal Pump
Model P2ELS Z
Serial Number 87442301-00
40 HP Marathon Motor
50 Hertz
3 Phase, 190/380 volt, TEFC
The P-2000 is a gear driven centrifugal pump.
- Flows to 180 gpm (41 m³/hr)
- Heads to 2,600 ft (792 m)
Used in the CPI, non-API HPI services, paper and general industry, P-2000 pumps are in continuous service worldwide.
Flow To 180 (41m³/hr)
Heads To 2,600(792m)
Max Power 75hp (55kw)
Temp Range -50 to 300°F (-46 to 149°C)
Number of Stages 1
Max Case Working Pressure 1,440psi;105 Kg/cm²
Max Suction Pressure 250psi;18 Kg/cm²
Differential Head N/A
HP Dependent on Diff. Head N/A
Standard Delivery 3 Weeks
Speed Range 5,987-14,707 rpm
Materials of Construction 316 Stainless Steel, AISI 4140 / 8620 / 9310 Steel, Aluminum or Cast Steel
Bearing Materials Available Ball Bearings, Riveted Steel, Phenolic, Grease Packed
Hydrotest Pressure 2,160 psig
Max Viscosity Consult Factory
Typical Applications Boiler Feed, Reverse Osmosis, NOx Suppression, Washdown, Injection, Seal Flush, Condensate Return, Gun Drilling, Felt Shower, Trim Squirt, Plane De-icing, Mining Dust Suppression
Industries Chemicals & Petroleum Refining, Power Generation, Pulp & Paper, Food & Beverage, Water Treatment, General Industry, Mining, Automotive
Industry Standard N/A
Solids Range up to 400 microns
Motor Details N/A
Mounting Configurations Horizonal Right and Left, Vertical Up and Down (viewed from suction)
Dimensional Standards N/A
Number of Available Hydraulics 147
Seal Configurations Available Single, Double, Tandem
Available Inducer Y
Seal Plans for Sunflo Pumps 11, 12, 13, 21, 31, 41, 52, 53
Available Flanges 300# RF, 600# RF
Pump Case Corrosion Allowance Generous Clearances, No Performance Degradation
Suction and Discharge Size 2" X 1.5"
|
:73/0
