Posted by:

Location:

U.S.A.

Ad Status:

Closed

Manufacturer:

Type:

Model:

Year (or range of years):

Condition:

Price (in US dollars):

Quantity:

Type of Seller:

Description:

Today?s Replacement Cost: $1.1 Million
Mill Working Area of 6?0? Diameter x 10?0? Length
Includes:
250 Horsepower Reliance Class II, Group E, High Torque, Explosion Proof Main Drive Motor with Air Brake
50 Horsepower Reliance Class II, Group E, High Torque, Explosion Proof, Two Speed Positioning Motor
Flender Model 280 ?Redurex? Right Angle Foot Mounted Speed Reducer
Novamet Patented Spiral Discharge Chute (60 Degree Angle of Slope)
Discharge Housing With Auger in the Hollow Trunnion
Jacket Rated for 75 PSIG with National Board Stamp; Rated for 308 Degrees F.
Double Rotary Union for Introduction and Removal of Cooling Medium From Jacket of Mill
Double Rotary Union for Introduction and Discharge of Atmosphere Gases on Discharge Trunnion
*The Gas Inlet and Discharge System is Removable form the Mill as an Assembly and Designed so that Powder or Balls cannot Enter the System. (There is a provision to back blow the sintered met a is)
Cylinder Mill Speed Range from 22.2 RPM to 31.5 RPM via Pinion Gear Changes
Cylinder Positioning Speed Range from 1.08 RPM to 1.53 RPM via Pinion Gear Changes
Cylinder Discharge Speed Range from 4.44 RPM to 6.31 RPM via Pinion Gear Changes
(8) 1 1/2? x 2? Litter Bars
Openings:
(1) 12 1/2? x 16 1/2? Rectangular Access with Bolted Frame sealed with 0-Rings
(2) 6? Diameter Charge Valves
(2) 5? Diameter Inspection Ports
(5) Discharge Valves
Constructed of
:1 5/16? Thick Cast Steel Heads with Heavy External Reinforcing Ribs-- Trunnions Cast Integral with Heads
3/8? Thick Steel Jacket Over the Cylinder with Horizontal Baffles to Insure Circulation of Cooling Medium
All Openings Gas and Powder Tight
All Parts of the Mill That are Contacted by the Product, (From the Feed Part Through to the Discharge Box),
Positioning Drive Connected to Main Drive with Heavy Duty Chain and Heavy Duty Overrunning Clutch for Continuous Operation
161 Tooth, 8? Face, Spur Type Drive Gear & Changeable Pinion Gears to Vary Speed
Drive & Pinion Gear is Guarded with a Split Design for Removal, and Sealed so that no Oil Leakage Occurs from Oil Bath